UK's Preferred Rope Access Services

Our rope‐access teams provide fast, efficient access for inspection, installation and maintenance when MEWPs or scaffolding aren’t practical. We focus on hazard reduction, safe site management, exclusion zones, and building rescue planning into every task.




Where it helps

Facades, atriums, plant areas and complex geometry where conventional equipment can’t reach or would create unnecessary risk.
Installation and repairs in hard‐to‐reach zones such as roofs, glazed facades and industrial plant.
Surveys, cleaning and minor repairs including snagging and photographic condition reporting.

How we deliver

Task‐specific methods and rescue plans
For every project we develop comprehensive risk assessments and method statements aligned with the UK Work at Height Regulations and HSE guidance, ensuring all work at height is properly planned, supervised and carried out safely. We tailor each plan to your site, ensuring our procedures meet or exceed all applicable British and European standards.
IRATA‐certified technicians
Our teams are trained, audited and managed with systems of work.
Photographic QA
We provide photographic evidence and reporting so you can verify work and manage residual risks.

Why Consider Summit Access

After 2 decades of working at height and installing safety systems for UK businesses, what sets us apart is a culture where protection comes first. Being safe is not negotiable, so our methods are designed to identify and control hazards.

Evidence over assumptions
Every decision is backed by survey data, calculations and photos you can audit at any time.
No-lapse compliance
Digital registers with QR tags, renewal prompts and version-controlled certificates keep you on top of regulatory obligations.
Lifecycle thinking
We design systems with maintenance access, parts availability and rescue considerations built in from day one, reducing future risks.
Vendor-agnostic inspections
We inspect and certify mixed estates to the same standard, regardless of who installed them.

Our Process

Our streamlined approach ensures your height safety systems are installed correctly and efficiently.

Discovery
We confirm objectives, the tasks at height, access points and any constraints or hazards.
Site Survey
Structures and substrates assessed; access routes and interfaces checked.
System Design
CAD layouts, fixings, calculations and safe methods prepared for approval.
Installation
Competent installers, controlled QA, and photographic evidence throughout.
Certification
Commissioning, testing and your full System Technical File issued.
Ongoing Support
Assets tracked in our digital register with reminders and trend monitoring.

The Standards & Assurance We Work To

All our installations and services adhere to the highest UK and European standards. Our experienced engineers ensure every system meets regulatory requirements.

  • Delivered in line with BS 7883:2019, BS EN 795, BS 8610 and the Work at Height Regulations 2005 (duty to prevent falls and maintain equipment).
  • Manufacturer-approved components and methods, with documented commissioning tests and traceable serialisation.
  • Transparent status reporting (pass/defect with remedials) and clear “do not use” labelling where required.

Why Consider Summit Access — Rope Access Services

We deliver precision and safety where others can’t reach. Our IRATA-certified teams operate under the strictest safety controls — reducing disruption, eliminating unnecessary cost, and ensuring every task is executed safely, with confidence and compliance.

This field is for validation purposes and should be left unchanged.
Name(Required)
Please let us know what's on your mind. Have a question for us? Ask away.

25 Higher Ash Road,

Talke,

Stoke-on-Trent,

Staffordshire 

ST7 1JN 

Services

Fall Protection Installations

Recertification

Rope Access

Consultancy Services

Useful links

About

Contact

Areas We Serve
FAQ

Summit Access – Frequently Asked Questions (FAQ)

Clear answers to common questions about our services, compliance, rope access and how we work.

General

Summit Access specialises in fall protection and height-safety solutions, including system design, installation, inspection, recertification, consultancy, and rope-access works. We support projects ranging from new installations to legacy system assessments.
We provide nationwide coverage across the UK, supporting facilities managers, H&S managers, building owners, contractors, local authorities, universities, student accommodation, heritage sites, stadiums, and more.
We typically work with facilities management teams, main contractors, property managers, surveyors, and anyone responsible for maintaining safe access at height on their buildings.

Inspections & Compliance

All inspections follow BS 7883:2019, BS EN 795, BS 8610, the Work at Height Regulations 2005 (WAHR), and other relevant UK standards. Our work is carried out by experienced, competent engineers with extensive backgrounds in installation, testing, and recertification.
Most fall protection systems require inspection at least every 12 months, or every 6 months for rope access or rescue critical equipment. Factors such as system type, usage, and environment may require shorter intervals.
Yes. We assess both legacy (pre-2019) and modern systems and can provide compliance reports, gap analysis, and recommendations to bring older systems up to current standards.
We provide a clear report outlining the reasons for failure, any safety-critical defects, recommended corrective actions, and where possible, practical solutions to restore compliance.

Installation & System Design

We install a full range of height-safety solutions, including:
  • Horizontal lifelines
  • Guardrail systems
  • Abseil rails and anchor devices
  • Davit sockets and portable davits
  • Fixed access ladders
  • Walkways and demarcation systems
  • Specialist rope-access anchor systems
Yes. Our consultancy team can design and specify compliant systems based on your building layout, access requirements, and applicable standards.
Yes. We carry out load testing for anchors, davit sockets, abseil rails, and other structural fixings in accordance with British Standards and manufacturer requirements.

Consultancy

We support clients with:
  • Height-safety audits & compliance assessments
  • System specification & design reviews
  • Risk assessments for access at height
  • Legacy system evaluation
  • Technical guidance for FM and project teams
  • Independent advice not linked to product sales
Yes. We assess your existing arrangements, highlight risks, and recommend practical solutions to keep personnel safe and ensure compliance.

Rope Access & Specialist Works

Yes. Our IRATA-trained rope access teams deliver inspections, repairs, high-level maintenance, and specialist access solutions where traditional access (scaffolding, MEWPs) is impractical.
In many cases, yes. Rope access is often faster, more cost-effective, and less disruptive, especially for high-level or difficult-to-reach areas.

Quoting & Project Management

You can contact us via our website, email, or phone. We’ll ask for basic information about your building or system and may arrange a site visit if required.
Yes. We conduct site assessments for installations, consultancy work, and inspection planning as required.
Availability depends on location and scope, but we aim to respond promptly and accommodate urgent requests wherever possible.

Training & Support

We can provide user awareness training for the systems we install, covering safe use, limitations, and duties under the Work at Height Regulations.
Yes. All new installations come with a full System Technical File, including design details, load calculations, compliance certificates, user instructions, and maintenance guidance.

Health, Safety & Insurance

Yes. We hold full public liability, employers’ liability, and professional indemnity insurance suitable for fall protection, rope access, and consultancy work.
Absolutely. Our engineers have extensive experience across installation, inspection, load testing, rope access, and technical compliance. Competency is demonstrated through training, qualifications, and years of practical industry experience.

Areas We Serve

We provide nationwide coverage across key UK cities and their surrounding areas. Use the search below or scroll through the list.

  • London and surrounding areas
  • Birmingham and surrounding areas
  • Manchester and surrounding areas
  • Glasgow and surrounding areas
  • Leeds and surrounding areas
  • Liverpool and surrounding areas
  • Newcastle upon Tyne and surrounding areas
  • Nottingham and surrounding areas
  • Sheffield and surrounding areas
  • Bristol and surrounding areas
  • Belfast and surrounding areas
  • Brighton and surrounding areas
  • Leicester and surrounding areas
  • Edinburgh and surrounding areas
  • Cardiff and surrounding areas
  • Coventry and surrounding areas
  • Southampton and surrounding areas
  • Portsmouth and surrounding areas
  • Plymouth and surrounding areas
  • Cambridge and surrounding areas
  • Oxford and surrounding areas
  • York and surrounding areas
  • Norwich and surrounding areas
  • Swansea and surrounding areas
  • Newport and surrounding areas
No locations match your search. Please try another city or clear the search box.

© Copyright 2023 Summit Access – All Rights Reserved

Got Questions? Send Us a Message!

This field is for validation purposes and should be left unchanged.
Name(Required)
Please let us know what's on your mind. Have a question for us? Ask away.