UK Fall Protection Inspection, Testing
and Recertification Specialist

Fall protection inspection and eyebolt testing help duty holders confirm that safety lines, anchors, davits and abseil rails remain safe, documented and suitable for continued use. We inspect, function-check and, where needed, load-verify components, then tag every asset and update your live digital register with certificates and remedial actions.

What Your Fall Protection Inspection Includes as Standard

Standards‐aligned inspection and test
Fall protection inspection at a risk-based frequency, typically 12 months, or 6 to 12 months depending on usage, environment and system type.
Clear outcomes and next steps
Where fall protection inspection or anchor point testing finds a system unsafe, it is clearly labelled out of service with written recommendations, remedial actions and return-to-service criteria.
Asset records maintained
Every safety system and fall protection asset is logged in your digital register with certificates, photos, current status and renewal reminders, from safety lines and eyebolts to davit sockets and abseil rails.

Why Duty Holders Choose Summit Access for Height Safety Inspection

After two decades installing height safety systems for UK businesses, our approach starts with the hazard rather than the product. Working at height is not negotiable on safety, so every survey, specification and installation method is built to identify and control risk before work begins.


Evidence over assumptions
Every decision is backed by survey data, calculations and photos you can audit at any time.
No-lapse compliance
Digital registers with QR tags, renewal prompts and version-controlled certificates keep you on top of regulatory obligations.
Lifecycle thinking
We design systems with maintenance access, parts availability and rescue considerations built in from day one, reducing future risks.
Vendor-agnostic inspections
We inspect and certify mixed estates to the same standard, regardless of who installed them.

Our Fall Protection Inspection
and Recertification Process

Our six-stage process covers fall protection inspection, eyebolt testing and anchor point testing, so every fall protection asset is checked, recorded and scheduled for its next inspection visit.

Discovery
We confirm objectives, the tasks at height, access points and any constraints or hazards.
Site Survey
Structures and substrates assessed; access routes and interfaces checked.
System Design
CAD layouts, fixings, calculations and safe methods prepared for approval.
Installation
Competent installers, controlled QA, and photographic evidence throughout.
Certification
Commissioning, testing and your full System Technical File issued.
Ongoing Support
Assets tracked in our digital register with reminders and trend monitoring.

Fall Protection Inspection Certified
to UK Standards

All eyebolt testing, anchor point testing and recertification is delivered in line with the applicable UK and European standards. Our experienced engineers ensure every system meets the relevant regulatory requirements.

  • Delivered in line with BS 7883:2019, BS EN 795, BS 8610 and the Work at Height Regulations 2005 (duty to prevent falls and maintain equipment).
  • Manufacturer-approved components and methods, with documented commissioning tests and traceable serialisation.
  • Transparent status reporting (pass/defect with remedials) and clear “do not use” labelling where required.

Why Consider Summit Access for Fall Protection Inspection, Testing and Recertification.

A proactive approach to fall protection inspection and compliance means assets are tracked rather than forgotten, keeping your documentation and safety responsibilities up to date.

This field is for validation purposes and should be left unchanged.
Name(Required)
Please let us know what's on your mind. Have a question for us? Ask away.

25 Higher Ash Road,

Talke,

Stoke-on-Trent,

Staffordshire 

ST7 1JN 

Services

Fall Protection Installations

Recertification

Rope Access

Consultancy Services

The SEO on this site is managed by Marketing Sales Management Ltd 

Useful links

About

Contact

Areas We Serve
FAQ

Summit Access – Frequently Asked Questions (FAQ)

Clear answers to common questions about our services, compliance, rope access and how we work.

General

Summit Access specialises in fall protection and height-safety solutions, including system design, installation, inspection, recertification, consultancy, and rope-access works. We support projects ranging from new installations to legacy system assessments.
We provide nationwide coverage across the UK, supporting facilities managers, H&S managers, building owners, contractors, local authorities, universities, student accommodation, heritage sites, stadiums, and more.
We typically work with facilities management teams, main contractors, property managers, surveyors, and anyone responsible for maintaining safe access at height on their buildings.

Inspections & Compliance

All inspections follow BS 7883:2019, BS EN 795, BS 8610, the Work at Height Regulations 2005 (WAHR), and other relevant UK standards. Our work is carried out by experienced, competent engineers with extensive backgrounds in installation, testing, and recertification.
Most fall protection systems require inspection at least every 12 months, or every 6 months for rope access or rescue critical equipment. Factors such as system type, usage, and environment may require shorter intervals.
Yes. We assess both legacy (pre-2019) and modern systems and can provide compliance reports, gap analysis, and recommendations to bring older systems up to current standards.
We provide a clear report outlining the reasons for failure, any safety-critical defects, recommended corrective actions, and where possible, practical solutions to restore compliance.

Installation & System Design

We install a full range of height-safety solutions, including:
  • Horizontal lifelines
  • Guardrail systems
  • Abseil rails and anchor devices
  • Davit sockets and portable davits
  • Fixed access ladders
  • Walkways and demarcation systems
  • Specialist rope-access anchor systems
Yes. Our consultancy team can design and specify compliant systems based on your building layout, access requirements, and applicable standards.
Yes. We carry out load testing for anchors, davit sockets, abseil rails, and other structural fixings in accordance with British Standards and manufacturer requirements.

Consultancy

We support clients with:
  • Height-safety audits & compliance assessments
  • System specification & design reviews
  • Risk assessments for access at height
  • Legacy system evaluation
  • Technical guidance for FM and project teams
  • Independent advice not linked to product sales
Yes. We assess your existing arrangements, highlight risks, and recommend practical solutions to keep personnel safe and ensure compliance.

Rope Access & Specialist Works

Yes. Our IRATA-trained rope access teams deliver inspections, repairs, high-level maintenance, and specialist access solutions where traditional access (scaffolding, MEWPs) is impractical.
In many cases, yes. Rope access is often faster, more cost-effective, and less disruptive, especially for high-level or difficult-to-reach areas.

Quoting & Project Management

You can contact us via our website, email, or phone. We’ll ask for basic information about your building or system and may arrange a site visit if required.
Yes. We conduct site assessments for installations, consultancy work, and inspection planning as required.
Availability depends on location and scope, but we aim to respond promptly and accommodate urgent requests wherever possible.

Training & Support

We can provide user awareness training for the systems we install, covering safe use, limitations, and duties under the Work at Height Regulations.
Yes. All new installations come with a full System Technical File, including design details, load calculations, compliance certificates, user instructions, and maintenance guidance.

Health, Safety & Insurance

Yes. We hold full public liability, employers’ liability, and professional indemnity insurance suitable for fall protection, rope access, and consultancy work.
Absolutely. Our engineers have extensive experience across installation, inspection, load testing, rope access, and technical compliance. Competency is demonstrated through training, qualifications, and years of practical industry experience.

Areas We Serve

We provide nationwide coverage across key UK cities and their surrounding areas. Use the search below or scroll through the list.

  • London and surrounding areas
  • Birmingham and surrounding areas
  • Manchester and surrounding areas
  • Glasgow and surrounding areas
  • Leeds and surrounding areas
  • Liverpool and surrounding areas
  • Newcastle upon Tyne and surrounding areas
  • Nottingham and surrounding areas
  • Sheffield and surrounding areas
  • Bristol and surrounding areas
  • Belfast and surrounding areas
  • Brighton and surrounding areas
  • Leicester and surrounding areas
  • Edinburgh and surrounding areas
  • Cardiff and surrounding areas
  • Coventry and surrounding areas
  • Southampton and surrounding areas
  • Portsmouth and surrounding areas
  • Plymouth and surrounding areas
  • Cambridge and surrounding areas
  • Oxford and surrounding areas
  • York and surrounding areas
  • Norwich and surrounding areas
  • Swansea and surrounding areas
  • Newport and surrounding areas
No locations match your search. Please try another city or clear the search box.

© Copyright 2023 Summit Access – All Rights Reserved

Got Questions? Send Us a Message!

This field is for validation purposes and should be left unchanged.
Name(Required)
Please let us know what's on your mind. Have a question for us? Ask away.